Dongtai egg incubator, energy saving egg incubator, hatching equipment provided by Riko Tarzan incubation equipment. Incubation Equipment Co., Ltd. Shandong Dezhou Riko (www.ruikefuhua.com) have been "Business League certification", please rest assured purchase through the entire network, click on the page check "Business League certification Icons" My company authentication information. You can also click on the "Business Alliance Service Icons" on this page directly contact our customer service! Often requires the introduction of long-distance transport of eggs, if the protection properly, often causing damage and tie loose eggs, gas chamber rupture, resulting in reduced hatchability. Packaging is best dedicated appliances eggs egg box (60 cm length × width 30 cm × height 40 cm energy saving egg incubator, 250) or plastic egg tray. Egg carton or egg dish must be strong, able to withstand a certain pressure, and to leave the vent. Must be filled when packing, you must use some filler to shock. If there is no special egg boxes, wooden baskets can also be shipped at this time available individually wrapped in paper egg incubator egg incubator, into the box (basket), the filling between the layers sawn wood surfaces or wood shavings, straw mats material, to prevent shock and vibration, try to avoid direct contact with eggs and egg. No matter what tools installed, try to make up the bulk or flat, arranged in neat rows, in order to reduce egg breakage. This is carried out in batches thermostatic incubator hatching of Schwinn program. To meet the needs of different embryonic egg. Usually within 3-4 batches of eggs incubator. At room temperature is too high, the entire batch of hatching in incubators inevitable late metabolic heat in excess greatly batches hatching can take advantage of metabolic heat as a heat source, you can reduce the "self warm" super warm, but also save energy. When the eggs hatch take thermostat incubator, the eggs of the old and new location must be staggered, so that the old eggs excess heat is absorbed by the new eggs, the eggs to solve the new high temperature is low, the old egg temperature under the same temperature conditions conflicts, thereby improving hatchability. The air temperature inside the machine is usually controlled at 37.8 ℃. It should be noted hatching machine up and down, front and rear, right and left temperature difference is not too large, the smaller the temperature difference in favor of the incubator, in general, the temperature difference can not exceed 0.1 ~ 0.2 ℃, temperature can be solved by adjusting the air inlet and outlet, etc.. If the temperature difference is large, it should be noted that the timing adjustment plate; reduce the impact of temperature difference on the hatchability.