Riko incubation equipment, incubators [manufacturers], Gulin incubators provided by Riko incubation equipment. We are Dezhou Riko hatch Equipment Co. (www.ruikefuhua.com) located at: Shandong Dezhou specializes in: automatic hatching machine, incubator, incubator, hatching brood machines, incubators, hatching accessories, etc. Our company is a professional committed to the development incubator, hatching equipment, incubators, automatic hatching machine, large hatch equipment. Xiaobian to introduce considerations incubation equipment. 1, should re-read the instructions before use. 2, check the fan is turned on, the basin is add water. 3, stop turning the eggs, egg turning motor check, turn the eggs of program-controlled switches, is available. 4, the heater and joints should be strong, to prevent burns managers. When cabinets operation, be sure to unplug it. 5, the use of fire house warm, water dish should be placed across the stratosphere above, if dissatisfied with egg tray egg rack, near the water dish as far as possible and hold. 6, humidity probe when not taking the best from the hatchery out to keep dry to prevent dew hanging prohibited mouth drink gas experiments probe, the probe can be used hand, the use of hand grasp the evaporation of moisture observations show elevated. We will provide quality products, competitive prices pheasants incubators, providing our customers with better service. Preparation before an incubator before installing to make cement floor flat. Incubator slightly forward (some models back) tilted to discharge sewage cleaning. In front of the machine to leave 2 to 3 meters of operating space. 2 for hatchery, incubator disinfected. This work should be conducted before incubating one week after the inspection carried out mechanically. Interior roof, floor, etc. should be cleaned every corner, rinse and clean the machine after use of potassium permanganate, formaldehyde fumigation or disinfection with hatching eggs. 3 Check the egg dish. To see whether the firm hatching egg tray box manufacturers, wire whether there is dislocation, fracture and bending phenomenon, so one by one check. 4 body checks. After repeatedly opened the door, to see if tight, the body walls, the roof and floor deformation, find fault and Repairing. 5. Correction maintenance machines. In one week before hatching incubators, to install the system checks whether the proper, strong, all electrical systems are connected, sensitive and accurate. Method for detecting the thermometer accuracy: Available accurate thermometer reading a thermometer inserted into the warm water and the incubator, the observed temperature difference, as the temperature difference is too large (greater than 0.5 ℃), should be replaced or taped Colonel positive mark. 6 during the check test machine. Commissioning process to the temperature of the supply for wet, alarm, fan systems and motor rotation detailed examination, some of these everything is normal, the test machine running 1 to 2 days before the official hatching. For preparation before incubating eggs, hatching eggs should do before incubating choice, that outside observers, according to the egg and necropsy method. Secondly, we should do the warm-up before incubating eggs and disinfection.